Methane emissions from abandoned oil and gas wells in Colorado.

Recent studies indicate emission factors used to generate bottom-up methane inventories may have considerable regional variability. The US's Environmental Protection Agency's emission factors for plugged and unplugged abandoned oil and gas wells are largely based on measurement of historic wells and estimated at 0.4 g and 31 g CH4 well-1 h-1, respectively. To investigate if these are representative of wells more recently abandoned, methane emissions were measured from 128 plugged and 206 unplugged abandoned wells in Colorado, finding the first super-emitting abandoned well (76 kg CH4 well-1 h-1) and average emissions of 0 and 586 g CH4 well-1 h-1, respectively. Combining these with other states' measurements, we update the US emission factors to 1 and 198 g CH4 well-1 h-1, respectively. Correspondingly, annual methane emissions from the 3.4 million abandoned wells in the US are estimated at between 2.6 Tg, following current methodology, and 1.1 Tg, where emissions are disaggregated for well-type. In conclusion, this study identifies a new abandoned well-type, recently-producing orphaned, that contributes 74 % to the total abandoned wells methane emissions. Including this new well-type in the bottom-up inventory suggests abandoned well emissions equate to between 22 and 49 % of total emissions from US active oil and gas production operations.

Uncertainty Quantification of Methods Used to Measure Methane Emissions of 1 g CH4 h-1.

The recent interest in measuring methane (CH4) emissions from abandoned oil and gas wells has resulted in five methods being typically used. In line with the US Federal Orphaned Wells Program's (FOWP) guidelines and the American Carbon Registry's (ACR) protocols, quantification methods must be able to measure minimum emissions of 1 g of CH4 h-1 to within ±20%. To investigate if the methods meet the required standard, dynamic chambers, a Hi-Flow (HF) sampler, and a Gaussian plume (GP)-based approach were all used to quantify a controlled emission (Qav; g h-1) of 1 g of CH4 h-1. After triplicate experiments, the average accuracy (Ar; %) and the upper (Uu; %) and lower (Ul; %) uncertainty bounds of all methods were calculated. Two dynamic chambers were used, one following the ACR guidelines, and a second "mobile" chamber made from lightweight materials that could be constructed around a source of emission on a well head. The average emission calculated from the measurements made using the dynamic chamber (Qav = 1.01 g CH4 h-1, Ar = +0.9%), the mobile chamber (Qav = 0.99 g CH4 h-1, Ar = -1.4%), the GP approach (Qav = 0.97 g CH4 h-1, Ar = -2.6%), and the HF sampler (Qav = 1.02 g CH4 h-1, Ar = +2.2%) were all within ±3% of 1 g of CH4 h-1 and met the requirements of the FOWP and ACR protocols. The results also suggest that the individual measurements made using the dynamic chamber can quantify emissions of 1 g of CH4 h-1 to within ±6% irrespective of the design (material, number of parts, geometrical shape, and hose length), and changes to the construction or material specifications as defined via ACR make no discernible difference to the quantification uncertainty. Our tests show that a collapsible chamber can be easily constructed around the emission source on an abandoned well and be used to quantify emissions from abandoned wells in remote areas. To our knowledge, this is the first time that methods for measuring the CH4 emissions of 1 g of CH4 h-1 have been quantitively assessed against a known reference source and against each other.